How to install your own front door

How to install your own front door
Do you want to install the front door yourself? Get new knowledge! In this article, we will show you how to do it easily and quickly.

In practice, installing a door may seem complicated, but we are sure that you can handle this task yourself. First, you need to prepare the tools:

  • screwdriver;
  • perforator;
  • drill;
  • level;
  • screwdriver;
  • Hammer;
  • Saw.

1.Initial preparation

Before installing the door, it is necessary to drill holes for fixing the frame and the lintel. The distance between the holes should be approximately 30-35 cm. Use a hammer drill or drill to make holes.

The next step is to install the door frame. Install the box in the hole, align it with a level and secure it with cargo self-tapping screws with an awl. Screw in the screws starting from the bottom holes and work your way up.

2. Hardware installation

After installing the box, you need to install accessories: handles, locks and other elements. Install the locks on the frame and door leaf with screws. You should also install hinges and handles.

Before installing the cylinder in the lock, check its operation. To do this, insert the key into the lock and check if it rotates easily. If the cylinder is spinning with difficulty, then the protrusion inside the cylinder should be bent.

3. Door leaf installation

After installing the box and fittings, you need to install the door leaf itself. Install the canvas in place and check that it is even and does not crack. Close the door and check its operation.

In conclusion, we hope that our article will help you master the installation of the front door with your own hands. Follow our advice, use our instructions and your new door will be installed without difficulty and problems. good luck!


Write a review

Note: HTML is not translated!
    Bad           Good